MAINTAINCE RINSING THE MOTORCYCLE
- Mop the dirt with a soft cloth while rinsing.
- Use a neutral detergent and wash the motorcycle with water to get rid of stubborn dirt or grime.
- Dry any residual water with a clean and soft cloth.
ADVICE
We recommend that our users apply mixed wax be careful to the paintwork and plastic parts gently to prevent scratches and chipping.
CAUTION
Clean the motorcycle only after the engine has cooled.
Keep water out of the muffler, air cleaner and electrical appliances to prevent rusting and short-circuiting.
Please ride slowly and carefully after washing your motorcycle since brake performance maybe affected by residual water.
It is recommended that you wait till the motorcycle is dry before riding it.
STORAGE
CAUTION
Shield the engine and muffler with dust guard after the surface has cooled.
ADVICE
- Please pay utmost attention to followings for long periods of storage.
- It is of great importance to was all parts to prevent rust. To preserve the battery and reduce leakage of electricity, please take the battery out and put it in a ventilated place away from exposure to light. If you don’t plan to remove it for storage, please disconnect the negative electrode.
- Remember to drain off all the gasoline from the carburetor to prevent rusting.
AFTER INACTIVITY
Rinse your motorcycle.
Check battery charge and re-charge if needed.
Check oil and fuel levels.
Do a thorough check of all parts and processes before using.
CAUTION
After long periods of disuse, test your vehicle initially at moderate speeds.